Ritron Jobcom J Series J-U410 Betriebsanweisung PDF herunterladen (Seite 23)

Have questions? Call

800-USA-1-USA

(800-872-1872) or visit our website at www.ritron.com

How To Delete A Channel

To delete a channel from your channel list, follow these instructions. Deleting a channel will remove that channel number from the display. It is

not necessary to delete a channel if you merely wish to change the frequency and/or tone settings. To change frequency or tone settings see

How To Program Per-Channel Features on page 14.

To Program Channel Delete:

Step 1. PRESS & HOLD Push-To-Talk button and turn radio ON.

Step 2. Radio will sound triple beep, then [CH PROG] will

ash on display for 3 sec. Then [CH – 1] or a

programmed name will appear on the display.

Step 3. Use to select the channel you want to

delete [CH _ _], 1-10.

Step 4. Press for Per-Channel Feature list

Step 5. Display will show [FREQ].

Step 6. Press to select [FREQ]. Display will then

show current frequency code for the channel; e.g. [F C_ _ ].

Step 7. Use buttons to scroll to [NONE]

Step 8. Press button to SAVE [NONE] selection.

Display will show selected feature; e.g. [FREQ].

Step 9. To select a different channel, PRESS the P1 Key

(orange button) on the top of radio. Display will

show the last channel deleted; e.g. [CH – 1].

Repeat Steps 3 – 8 or…

Step 10. To return to normal operation turn radio OFF and

then ON.

Step 11. The channel(s) you deleted will not appear on

the display in normal operation.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

Ritron Jobcom J Series J-U410 Betriebsanweisung Seite 23