Ritron DATAFLOW RTU Series Betriebsanweisung PDF herunterladen (Seite 48)

DATAFLOW RTU

EXAMPLE 6 (continued)

8.7.5 Execute the SYSTEM MONITOR - UTILITIES screen to view two ID fields:

The top left field on the UTILITIES screen selects which RTU is active when polling inputs or

setting outputs. This field is the only field used in Example 6 configuration.

· Set this ID to 1, then execute the SINGLE POLL command. The current input status of

RTU ID 1 displays on the screen.

· Change the ID to 2, then execute the SINGLE POLL command. The current input status

of RTU ID 2 displays on the screen.

· Execute the START POLL command to cause continuous polling at 5-second intervals.

(If RTU ID 1 Inputs are changed, the changes are reflected in screen updates.)

· Execute STOP POLL command to stop polling.

NOTE: The lower left ID field is used to select which RTU is active when a transmitter test is

requested  not needed for Example 6 configuration.

( B-23 )

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 62 63

Keine Kommentare

Ritron DATAFLOW RTU Series Betriebsanweisung Seite 48